DIY Appliance Repair Tips

Wait! Before you decide to hire an appliance repair in Beaverton for help, you can keep your appliances in good shape with the help of a lot of the troubleshooting tips below.

1. Smelly Washing Machine

The presence of a bad odor in your washing machine defeats the entire reason for owning the appliance! If you are in the process of attempting to wash your laundry items so that they are fresh and clean, but your washer won’t cooperate, run an empty cycle in hot water with 2 cups of white vinegar and a half-cup of baking soda to eliminate the unpleasant smell. This problem often happens in front-loading washing machines. To prevent future smells, prop the door open between cycles so it will dry out.

2. Inefficient Refrigerant

A lukewarm refrigerator in the kitchen is not a welcome sign. A warm refrigerator won’t keep liquids cold or refreshing, and the food on the inside might also be on the verge of going rotten! In many cases, your refrigerator might not need repair; interior could just need to be cleaned. Or the coils on the rear of the appliance need cleaning.

Unplug the appliance and drag it out from the kitchen wall prior to wiping down the coils. If you don’t see instant cooling improvement, it’s best to reach out to a professional appliance repair technician in Beaverton for troubleshooting.

3. Clicking Igniter on Stove

If the igniter on your gas-powered stove clicks nonstop and the burner doesn’t light, look to make sure the burner lid is in place and properly aligned. You may also experience this if you’ve had a recent boil over or liquid spill on the top of the stove.

Otherwise, the source is probably a dirty igniter. To clean the igniter, first take off the burner top and wipe away any loose debris. You can use a metal pin to pick dirt from the grooves of the igniter. If that does not fix the problem, it’s smart to not take a lighter apart for anyone without the proper training; in this case call a professional appliance repairman to determine the problem.

4. Broken Garbage Disposal

A kitchen sink’s garbage disposal has self-protection with its own overload trip. If it is filled up, overheats, runs for too long, or has a different problem, your garbage disposal could simply have to be reset rather than repaired. First, make sure the switch is OFF. Next, locate the reset switch on the disposal beneath the sink and then press the button. If the switch doesn’t stay pushed in, just wait ten minutes and press it again. Turn on the water from the faucet and press the switch on.

If the garbage disposal is filled up with debris and you only hear a humming noise rather than waste grinding, you may need to twist the blades with a hex key to remove the clog. Now, push in the reset button to get the disposal grinding again. If the previous tips don’t get things working like it is supposed to, please do not allow the temptation to shove your arms down in the disposal to solve the issue. Be safe and schedule an appointment with a professional appliance company in Beaverton.

5. No Power from Outlet

In the bathroom or kitchen, the electrical outlets need to be installed with GFCI switches to protect homeowners against harm in wet environments. If a GFCI outlet is not generating power, press the red “reset” button to see if that restores juice.

If it doesn’t, or if you are trying on a standard electrical outlet, make certain that a breaker has not tripped in your home’s breaker box. If you’re uncertain if a breaker has been tripped, switch it to the OFF position and back to the ON position. Please remember, safety around electricity is a must. Should you have any doubts, call a professional.

6. Wobbling Washing Machine

A shaking washer will produce a loud banging and isn’t a ideal way to wash clothes. If yours is abruptly shaking, the unit could be broken. In order to repair this issue, turn the legs of the washing machine to lift or lower each corner until it is straightened out. One other likely situation is that the appliance is off balance. Open the lid and move around the clothing items so they’re dispersed in the drum of the appliance.

Doing this could help your washing machine to not have to work quite as hard. If you do try to move around the clothing a couple of times without luck, don’t ignore the issue. You may have a loosened motor or drum mount, which should be easy for a professional technician to repair. But if you continue to operate your washing machine when it has this problem might break other pieces and lead to a bigger repair in the future.

Call for Help

If none of these quick fixes are able to fix your broken appliance, it is time to schedule an appointment from Beaverton Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts